Desiccant breathers are one of the most cost effective methods of protection for contamination control. Breathers are an integral piece to any fluid lubrication, hydraulic system, or storage tank. Breathers provide protection from moisture and particulate contamination in harsh operating environments. The best operations & maintenance practices focus on preventing contaminants from entering their equipment, rather than trying to remove contaminants after damage has already occurred.

As most equipment and machines are designed to "breathe," protecting the inflow of ambient air is vital for protection and reliable operation. Contaminants and moisture will enter equipment as temperature, pressure, and fluid level changes occur. To prevent contaminents from entering your equipment, a desicant breather should be used.

Drytech ZEOZORB desiccant breathers use several layers of high efficiency filters to capture particulates, moisture, and maintain ISO cleanliness codes. Drytech's unique ZEOLITE desiccant blend allows for extremely low relative humidity levels be maintained. Not only do our breathers protect containimants and moisture from entering your equipment, but many test results show that Drytech breathers will actually liberate water from within the fluids or chemicals being stored in the tank simply by having a breather fitted on top of the tank or reservoir.This dynamic is vital to maintain maximum life and performance of the lubricant or chemical being stored.

Recommendations

  1. DRYTECH recommends replacing spin on air filter vents, turn down pipes, or vent caps with ZEOZORB disposable desiccant breathers for additional protection against contaminants.
  2. DRYTECH recommends inspecting your breather every 6 months.
  3. DRYTECH recommends adding breather replacements to plant operations & maintenance schedules

QUICK FACT:
It costs 10x more to remove particulate and water contamination than by preventing it in the first place. Use Drytech Disposable Desiccant Breathers as your first line of defense.

1 - 2 of 2 | Results Per Page | View | Unit of Measure
1 

Item #

Thread Size

Height

Top Cap Diameter

Overall Length

Max. Operating Temp.

Filter

Flow Rate

Applications

ZZ-150 N/A 1" Friction Fit N/A 4.5 in N/A 5 in N/A 6.2 in N/A 200 F N/A 3 Micron N/A Up to 10 SCFM N/A Protection of fluid systems by preventing entry of moisture and particulate. 55 gallon drums, storage totes, small gearboxes, etc.
ZZ-300 N/A 1" Friction Fit N/A 9.5 in N/A 5 in N/A 10.7 in N/A 200 F N/A 3 Micron N/A Up to 10 SCFM N/A Protection of fluid systems by preventing entry of moisture and particulate. Large containers, storage totes, gearboxes, transformers, hydraulic reservoirs
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1